How should a wooden grille background wall be designed?

Wooden lattice background walls are a great choice, so today I will provide more convenience for everyone. The editor will introduce some designs and constructions of such background walls for your understanding. This type of background wall is a very special kind of background wall. Many people choose background designs.

Wooden lattice background wall construction drawings: The wooden lattice frame should be made after measuring the exact dimensions of the ceiling. The surface of the keel should be sanded and polished, joints should be mortised, and the joints of horizontal and vertical keels should be half-grooved and overlapped, and coated with flame retardant. During installation, elevation control lines and hanger installation lines should be marked according to the design, wooden wedges should be drilled into the walls and ceiling, and the top hangers should be fixed on the inner hooks of the keel using qualified metal wires. Use an overall hoisting method during installation. This type of frame will move along the elevation line as a whole and connect to the hanging parts on the ceiling. After connecting all hanging parts to this frame, adjust the length of the hanging parts to make the lattice surface flat. Usually, wood pieces are pasted, lighting fixtures and closed decorative lines are installed. After making this frame, lamp holders can be installed, and power can be turned on after hoisting. Decorative strips of the lattice inner frame should be installed on the floor, and after the wall is installed, sealing lines should be applied to seal the edges. After installation is complete, it is necessary to clean the surface.

Rare quality defects and solutions of this type of background wall: Irregular grids and non-square grids are mainly caused by non-square structural walls or non-vertical openings at the intersections of horizontal and vertical grids. Therefore, before placing the wooden lattice frame, it is necessary to find the squareness of the base wall. First, measure the length and angle of each side with a ruler. If the error is small, putty can be used to level the wall; if the error is large, first level the wooden board, then use putty to smooth it. When the horizontal and vertical keel lattice grooves overlap, they must be vertical; otherwise, they should be repaired before installation. Uneven surfaces and arch collapses are mainly caused by lack of strict joint structure, wood deformation, and excessive weight of lighting fixtures. Therefore, pine wood that is not easily deformed should be chosen as the frame. To prevent wall overload, the wall must meet load specification requirements. If there is an arch, the hanging parts can be adjusted to make the top surface level.

The above are some designs and constructions of wooden lattice background walls introduced by the editor. I hope you can use this as a reference to understand. I believe it will definitely provide good advice for my decoration, but when designing, it is best to find a professional design and construction company to ensure the best results.